HT Italia Macrotest 5035 Part P Tester

The new Macrotest 5035 Part P tester allows you to test and Certify electrical installations to the new Part P regulations. It allows you to test and measure Continuity, Insulation, Global Earth values, RCD's tripping times, line and fault loop impedance measurement with prospective short circuit current calculation and, phase sequence indication. You can even store the test results with the built in memory, recall the electrical test results on the test instrument display and transfer these results to a serial printer or PC.

PM230 230V Appliance Energy Meter

Plug a 230V UK electrical appliance into the PM230 energy meter to monitor the electrical energy the appliance consumes. This handy eight function energy meter / monitor helps to save electricity and money! The Kwh/ Energy meter can provide you with an accurate cost analysis of the appliance you plug in to it. As well as providing voltage and frequency readouts, the meter also shows wattage and kWh readings. The Power / Energy meter will give you the knowledge to save money!

4 in 1 Environment Test Meter

This Environment Test Meter measures Sound in dB, Light in Lux, Relative Humidity as %RH and Temperature in deg C or deg F This popular hand held test meter is simple to operate has a large display and a few simple buttons to select the environment parameter to be measured. We can also get this unit calibrated please call for details.

Martindale TEK500 Microwave Leakage

Easy to use and low cost Microwave Leakage Detector with a simple PASS/FAIL indicator, perfectly suitable for testing both commercial and domestic microwave ovens. This microwave leakage detector is manufactured to comply with national standards of permitted exposure levels BS5175.

Martindale VI13700G Voltage Indicator

This Martindale contact voltage indicator meets the GS38 safety recommendation. It safely checks for AC and DC voltages from 50V AC to 600V DC. The long life, bright neon indicators give a clear and fast display of the voltage level range. The Martindale VI 13700G voltage indicator has been designed with electrical safety in mind, finger guards to prevent slipping onto live electrical circuits, double insulated test leads and a lockable and retractable prod sheath. 2 year warranty.

TM201 Lux Light Meter

This digital Light Meter / Lux  Level Meter is simple to use and can measure light levels in Lux or in FC (Foot Candles) Measures LUX and FC on a 3.5 digit LCD. It can measure up to 200,000 Lux ! The TM-201 light meter has a data hold switch, a maximum hold feature and a low battery indication. The light sensor is at the end of a 1.5m coiled cable to enable the light level measurements to be made without the operator shading the light reading sensor.

This analogue Sound Level Meter is simple to use and can measure sound levels in dB and has A & C weight settings

The Leica Disto A3 digital laser distance meter can measure distances of up to 100m with an accuracy of 3mm

This Multimeterix CM600 clamp meter is simple to use and can measure AC current, voltage and resistance

The Robin TX90 microwave leakage level meter / detector kit is a perfect companion for any PAT testers kit!

This Multimeterix DM90 digital distance meter is simple to use and can measure length, height, width, area and volume.

The CA40 Gauss meter which has been designed for measuring Gauss and radiation.